Stainless Steel Eye Bolts

Follow these steps for the proper installation:

• Pre-Drill Holes: For lag eye bolts, pre-drill holes of appropriate size for a snug fit.
• Utilize Washers and Nuts: When using eye bolts that have through holes, apply washers and nuts to fix them. This helps in spreading the load evenly and stops pull-through.
• Torque Specifications: Fasten the eye bolts with torque specifications for a steady and dependable hold.
• Check Alignment: Verify that the eye bolt is aligned with the load to prevent side loading, which may decrease its load-carrying capacity and lead to failure.
• Routine Inspections: Perform regular checks on eye bolts to identify any wear, corrosion, or impairment that may have occurred and replace them when necessary.

Contact Marsh Fasteners for fast shipping, great customer service, and the best selection of stainless steel fasteners for coastal construction and fastening.

These are the types of stainless steel eye bolts:

• Standard Eye Bolts: Have a simple looped head, suitable for general purposes.
• Shoulder eye bolts: They have a shoulder located under the eye, which can bear angular loads and offer more strength.
• Lag Eye Bolts: Have a threaded end for screwing into wood or other materials.
• Machinery Eye Bolts: Designed for heavy-duty lifting and securing machinery.

Choosing the Right Eye Bolt:

• Load Capacity: Select based on the weight and load requirements of the application.
• Type and Length: Make sure the type of thread is appropriate for the material you are going to secure it in, and also consider if it is long enough to ensure a strong hold.
• Head Type: Select from standard or shoulder eye bolts, this depends on whether there is a requirement for handling angular load.
• Environmental Conditions: Check if the eye bolt is appropriate for environmental conditions, particularly when it’s used in areas with corrosion or marine elements.

Follow these steps to ensure a secure installation:

• Anchor Points: Make sure the hooks are connected to strong and steady anchor points that have the ability to hold up the load.
• Correct Tools: Use appropriate tools for installing hooks to ensure. they are securely fastened.
• Load Alignment: Make sure the hook is in line with the load’s direction, so no bending or deformity happens.
• Standard Examinations: Check the condition of hooks often, looking for indications of wear, rusting or harm. Put in new ones when needed.

Follow these steps to ensure it is used safely and securely:

• Load Limits: Do not exceed the load capacity of the hook.
• Even Distribution: Distribute the load evenly to prevent stress concentration on a single point.
• Safety Measures: Keep to safety rules for lifting and fastening loads, notably in industrial and building areas.

The correct size depends on the load capacity and the specific application. Always refer to the manufacturer’s specifications for guidance on load limits and dimensions.

The section contains many styles of eye bolts in both 18-8 and 316 Stainless Steel. Please view individual items for specifications. Contact our sales department for additional information and bulk pricing.

18-8 stainless steel offers good corrosion resistance and is suitable for many indoor applications. In contrast, 316 stainless steel provides superior corrosion resistance, making it ideal for marine and outdoor environments.

It’s essential to use eye bolts properly to avoid mishaps and extend the life of your tools. The following safety advice is provided:

• Align the eye bolt with the sling to avoid bending.
• Use washers for a tight fit.
• Ensure most of the threads are engaged when using washers.
• Attach one sling leg per eye bolt.
• Clean the hole and threads before use.
• Tighten the eye bolt properly and ensure enough depth for screw types.
• For lifting at a 90° angle, use regular eye bolts; avoid exceeding 45° for horizontal lifts.

Choosing the appropriate eye bolt for your project is essential to guaranteeing both effectiveness and safety. Here are some important considerations:

• Working Load Limit (WLL): This tells you the maximum safe load for the bolt.
• Material: Ensure the bolt is compatible with the material it’s attaching to and can handle the weight. Stainless steel is great for corrosion resistance.
• Attachment Type: Make sure the bolt suits your equipment or material for a secure fit.
• Load Angle: Eye bolts hold less weight at an angle, so choose a shoulder eye bolt for angled loads.
• Safety: Avoid overloading and use tools to securely tighten bolts.

You have a few options for stainless steel eye bolts and hooks, each made for a particular use. Here is a quick summary of the available types:

• Regular (Plain) Nut Eye Bolt: Secured with a nut, used where there’s access from both sides.
• Shoulder Nut Eye Bolt: Includes a shoulder for better load support, ideal for hoisting.
• Machinery Eye Bolt (316 Stainless Steel): Fully threaded and strong, used for lifting heavy equipment.
• Bent-Formed Eye Bolt: A flexible option that can attach to cables for various uses.
• Lag Eye Bolt: Designed for wood, screws into the material for secure attachment.
• Screw Eye Bolt: Easy to attach for lighter loads with a tapered shank.
• Military Spec MS51937: Meets military standards for heavy-duty machinery lifting.
• Lifting Eyes: Strong, heat-treated eye bolts for heavy lifting.
• Eye Bolts with Rings: Used for non-lifting purposes, with welded rings.

Stainless steel eye bolts are strong, looped-head bolts used to lift or secure loads. The loop (or eye) allows for easy attachment of ropes, cables, or slings. They’re commonly used in construction, marine environments, and rigging. The stainless steel material makes them resistant to rust and corrosion, making them suitable for both indoor and outdoor use.